SAE J700 Upper Coupler Kingpin--Commercial Trailers and Semitrailers
作者:标准资料网 时间:2024-05-26 11:07:51 浏览:9602
来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J700
Title:Upper Coupler Kingpin--Commercial Trailers and Semitrailers
Issuing Committee:Truck And Bus Total Vehicle Steering Committee
Scope:This SAE Standard applies to upper coupler kingpins for commercial trailers and semitrailers in the unladen condition. See Figure 1. A 90 degree ± 1 degree angle extends (in all directions) from the centerline of the kingpin to the upper coupler plate surface within a 48.26 cm (19 in) radius. The upper coupler plate surface should not bow downward (convex) more than 0.635 cm (1/4 in) within a 48.26 cm (19 in) radius or more than 0.3175 cm (1/8 in) at a radius of 25.4 cm (10 in) from the kingpin. The upper coupler plate surface should not bow upward (concave) more than 0.15875 cm (1/16 in) within a 48.26 cm (19 in) radius. (See Figure 2.)NOTE--For recommended performance, see SAE J133.
Title:Upper Coupler Kingpin--Commercial Trailers and Semitrailers
Issuing Committee:Truck And Bus Total Vehicle Steering Committee
Scope:This SAE Standard applies to upper coupler kingpins for commercial trailers and semitrailers in the unladen condition. See Figure 1. A 90 degree ± 1 degree angle extends (in all directions) from the centerline of the kingpin to the upper coupler plate surface within a 48.26 cm (19 in) radius. The upper coupler plate surface should not bow downward (convex) more than 0.635 cm (1/4 in) within a 48.26 cm (19 in) radius or more than 0.3175 cm (1/8 in) at a radius of 25.4 cm (10 in) from the kingpin. The upper coupler plate surface should not bow upward (concave) more than 0.15875 cm (1/16 in) within a 48.26 cm (19 in) radius. (See Figure 2.)NOTE--For recommended performance, see SAE J133.
下载地址: 点击此处下载
